Serving the Jackson area  ·  (601) 213-0169  ·  Open Mon-Sun 7am-7pm
📞 (601) 213-0169 Free Quote

Metal Roofing in Bolton, MS (39041) · Local Professionals

Jackson Metal Roofing · Fast response in Bolton and the Jackson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+352Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bolton is a small town where the lots are wide, the pines are tall, and most roofs have seen a few decades of Mississippi weather. The housing stock here is a mix of older brick ranches, farmhouses, and metal outbuildings, with a good number of homes sitting on acreage along roads like Highway 80 and Bolton Brownsville Road. If you live here, you know the afternoon storms roll in fast and the wind-driven rain finds every loose fastener.

That is why homeowners in Bolton (39041) call Jackson Metal Roofing. We are based in Jackson and know the Capital Region well, from the older neighborhoods to the rural edges of Hinds County. When a screw backs out or a panel starts to lift, we can get out to Bolton and take a look, often the same week. Our team focuses on metal roofing because that is what we do best, and we bring that focus to every repair and installation in Bolton.

Metal Roofing in Bolton (39041)

Bolton sits in the Pearl River valley on rolling Yazoo clay soil, and that clay moves with the seasons. It swells when it is wet and shrinks when it dries, which can put stress on roof structures and fasteners over time. Many properties here have a mix of main houses and outbuildings like barns, carports, and workshops, often with corrugated or ribbed panel roofs that take a beating from wind-driven rain. The tall loblolly pines and water oaks are beautiful, but they drop needles and limbs that hold moisture in valleys and around flashings, leading to rust and leaks if not addressed. We see a lot of screw replacement and re-fastening work because the original fasteners back out or the washers degrade after years of UV and thermal movement.

Our team has worked on metal roofs across Bolton and the surrounding areas, from simple panel repairs to full standing seam installations. We understand the local conditions and know what holds up. Whether it is a home near the Bolton Depot or a barn out on a county road, we bring the same attention to detail and use quality materials that are made for this climate.

Our services in Bolton

How a Job Works in Bolton

Step 1: You call us at (601) 213-0169 or fill out our contact form. We will set up a free on-site assessment at a time that works for you. Our team will inspect your roof, take photos, and go over what we find. We will explain the options and give you a written estimate before any work begins.

Step 2: Once you approve the estimate, we schedule the work. For most repairs in Bolton, we can get started quickly. If your project requires a permit, we will handle the paperwork with the local building department. On installation days, our crew arrives on time, protects your landscaping, and keeps the job site organized. We know that some properties in Bolton have tight access or long driveways, so we plan accordingly.

Step 3: After the work is done, we clean up thoroughly. We walk the property with you to make sure you are satisfied, and we do not leave until the site is clean and you have had a chance to ask questions. We want you to feel confident in the work we have done.

Pricing for metal roofing in Bolton depends on the size of your roof, its condition, access, and the materials you choose. For a typical repair like fixing a leak or replacing screws, you might spend a few hundred dollars. A full metal roof installation on an average home could range from $8 to $10 per square foot for basic panels, with standing seam starting around $10 per square foot. More specialized materials like copper or stone-coated steel will cost more. We always provide a free estimate so you know exactly what to expect. Call us at (601) 213-0169 to schedule yours.

My barn roof on Bolton Brownsville Road has screws backing out. Can you fix that without replacing the whole roof?
Yes, that is one of our most common jobs in Bolton. We can replace the screws and re-fasten the panels, which is much more affordable than a full replacement. We will inspect the panels for any damage and make sure the repair is solid.
A storm just blew through Bolton and lifted some panels on my roof. How quickly can you get out to inspect the damage?
We offer free storm damage inspections and prioritize emergency calls after storms. Call us at (601) 213-0169 and we will schedule a visit as soon as possible, often within 24 to 48 hours depending on demand.
What is the typical cost for a metal roof replacement on a 1,500 square foot home in Bolton?
For a basic corrugated panel roof, you might be looking at around $5.50 to $8 per square foot, so a 1,500 square foot roof could be in the range of $8,000 to $12,000. Standing seam or stone-coated steel will be higher. We provide a detailed estimate after inspecting your roof.
Do I need a permit for a metal roof installation in Bolton?
Permit requirements vary, but most jurisdictions require a permit for a full roof replacement. We will check with the local building department and handle the permit application for you. We make sure the work meets all local codes.
My neighbor and I are not sure where the property line is. Do you need to access their yard to work on my roof?
We try to work entirely from your property, but sometimes access to a small area of the neighbor's yard is needed for equipment. We will discuss this with you beforehand and coordinate with your neighbor if necessary. For HOA approvals, we can provide documentation and work with your HOA to meet their requirements.
Are you fully insured for roofing work in Bolton?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance should I do on my metal roof in Bolton to prevent leaks?
Keep the roof clear of pine needles and leaves, especially in valleys and around flashings. Inspect fasteners annually and replace any that are loose or have worn washers. We offer maintenance inspections and can handle the upkeep for you.
Why choose us?

Trusted professionals in Jackson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Jackson

All your work handled by qualified professionals in Jackson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

352+ Verified Client Reviews in Jackson

⭐⭐⭐⭐⭐ 4.9/5 · 352 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Jackson · Response within 24h · No commitment · ☎ (601) 213-0169

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Jackson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm