Serving the Jackson area  ·  (601) 213-0169  ·  Open Mon-Sun 7am-7pm
📞 (601) 213-0169 Free Quote

Metal Roofing in Terry, MS (39170) · Local Professionals

Jackson Metal Roofing · Fast response in Terry and the Jackson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+352Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Terry is a small town where the lots are wide, the pines are tall, and a lot of us live in older homes or on acreage with a barn or workshop out back. If you drive down Cunningham Street or out toward the Terry Lake area, you'll see everything from mid-century brick ranches to newer builds with corrugated panels on outbuildings. That mix of housing stock and rural property is exactly what we work on every week.

Homeowners in Terry (39170) call Jackson Metal Roofing because we understand the local conditions: Yazoo clay that shifts under the slab, pine needles that pile up in valleys, and storms that roll in fast off the Pearl River valley. We're based in Jackson, just up the road, and we've been helping folks here protect their roofs with metal systems that handle heat, wind, and debris without constant repair.

Metal Roofing in Terry (39170)

Terry sits in the Pearl River valley on rolling Yazoo clay, and that clay moves with the seasons. It swells when it's wet and shrinks when it's dry, which can rack older homes and open up seams or flashing gaps over time. A lot of properties here are on generous lots with mature loblolly pines, live oaks, and water oaks, so gutters and roof valleys collect pine needles and leaf debris that hold moisture. That's a big reason we see so many corrugated and ribbed panel roofs on barns, carports, and workshops, and why screw replacement and re-fastening are common calls in Terry. The older homes closer to the center of town often have low-slope or gabled shingle roofs that are due for an upgrade, while rural acreages need durable metal that can handle falling limbs and straight-line winds without a full tear-off every few years.

Our team has worked throughout Terry and the surrounding Jackson area, from small in-town lots to rural properties off Highway 80 and near the Terry schools. We know how to handle tight access, long gravel driveways, and the kind of site conditions that come with living under a heavy tree canopy.

Our services in Terry

How a Job Works in Terry

Step 1: You call us at (601) 213-0169 or request a free estimate online. We schedule an on-site assessment at your property in Terry, look at the roof condition, access, and any signs of leaks or storm damage, and then give you a clear written estimate. No pressure, no surprises.

Step 2: Once you approve, we pull the required roofing permit with the local building department and schedule the work. For a lot of Terry properties, that means planning around tree cover, narrow driveways, or a barn or workshop that needs panel work. We coordinate delivery and staging so we don't tear up your yard, and we keep you posted on timing, especially if weather delays us.

Step 3: When the job is done, we walk the property with you, clean up every nail and scrap, and make sure you're satisfied with the finished roof. We leave your place as clean as we found it, or better.

Pricing for metal roofing in Terry depends on the size and pitch of your roof, the condition of the existing decking, access, and how soon you need it done. For a typical corrugated or ribbed panel roof on a barn or workshop, you're looking at around $5.50 per square foot and up. A full metal roof installation on a home starts around $8 per square foot, standing seam starts around $10, and metal roof replacement starts around $9. If you're retrofitting over existing shingles, that starts around $7 per square foot, subject to code limits on layers. Smaller repairs like leak fixes start around $450, and screw replacement or re-fastening starts around $750. We always provide a free estimate so you know the real number before we start. Call (601) 213-0169 to schedule yours.

My barn off Highway 80 has corrugated panels with screws backing out. Can you re-fasten and replace the screws without replacing the whole roof?
Yes, that's one of our most common calls in Terry. Screw replacement and re-fastening starts around $750, and we inspect the panels for rust or damage while we're up there. If the panels are still sound, we replace the fasteners with proper gasketed screws and check the washers so you get a watertight seal again. If a few panels are too far gone, we can replace just those sections.
A storm just took off some panels on my roof in Terry. How fast can you get out for an emergency repair?
We offer free inspections for storm and wind damage, and we prioritize active leaks and lifted panels. Call us at (601) 213-0169 and we'll schedule the soonest available assessment. We can often tarp or secure the area temporarily to prevent further water damage while we order materials and schedule the permanent repair.
What does a typical metal roof cost for a mid-sized home in Terry, and what factors change the price?
For a mid-sized home, a basic corrugated panel roof might start around $5.50 per square foot, while standing seam starts around $10 per square foot. The biggest cost factors are roof size and pitch, whether we need to remove existing shingles, the condition of the decking, and access (like a steep gravel driveway or tight tree cover). We give you a free estimate with a clear breakdown before any work begins.
Do I need a permit to replace my roof in Terry, and who handles that?
Roofing permits are commonly required for a full replacement or re-roof in Terry, and the rules vary by jurisdiction. We handle pulling the permit with the local building department as part of the job, so you don't have to worry about the paperwork. We also stay up to date on inspection requirements so your project passes without delays.
My neighbor's tree limbs hang over my roof in Terry. What are my rights, and will my HOA have a say in the roof color?
Property line and tree limb issues are civil matters between neighbors, so we recommend talking with your neighbor first about trimming overhanging limbs. If you're in an HOA, they may have design review rules about panel profile and color, so check with them before ordering materials. We can provide product samples and specs to help with the approval process.
Are you insured for roof work at my Terry property?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you and your property if anything goes wrong on the job. We're happy to provide proof of insurance before we start.
What maintenance should I do on my metal roof in Terry to prevent leaks, especially with all the pine needles?
Keep your gutters and roof valleys clear of pine needles and leaf debris, because that's the number one cause of moisture problems here. Twice a year, and after big storms, check for loose screws or lifted panels, especially on barns and outbuildings. A professional inspection once a year can catch small issues before they become leaks, and we offer free estimates for any repair work you need.
Why choose us?

Trusted professionals in Jackson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Jackson

All your work handled by qualified professionals in Jackson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

352+ Verified Client Reviews in Jackson

⭐⭐⭐⭐⭐ 4.9/5 · 352 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Jackson · Response within 24h · No commitment · ☎ (601) 213-0169

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Jackson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm