Serving the Jackson area  ·  (601) 213-0169  ·  Open Mon-Sun 7am-7pm
📞 (601) 213-0169 Free Quote

Metal Roofing in Flowood, MS (39232) · Local Professionals

Jackson Metal Roofing · Fast response in Flowood and the Jackson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+352Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Flowood is that stretch of Rankin County where 1980s and 1990s brick subdivisions meet the Ross Barnett Reservoir, and the shingles on those roofs have been baking in Mississippi sun for thirty years. Drive through neighborhoods off Lakeland Drive or near the Dogwood Festival Market and you will see plenty of low-pitch roofs holding onto pine needles and storm debris.

Homeowners in Flowood (39232) call Jackson Metal Roofing because we know how this climate treats a roof. Between the summer UV, the straight-line winds that roll through the Pearl River valley, and the occasional hail, asphalt shingles take a beating here. We are based in Jackson, fully insured, and we handle metal roof installation, repair, and replacement throughout Flowood and the surrounding areas.

Metal Roofing in Flowood (39232)

Flowood sits on rolling Yazoo clay, and that soil movement matters for your roof. It swells when wet and shrinks when dry, which can stress flashing details and cause fasteners to work loose over time. The lots here vary from tight cul-de-sacs in older brick subdivisions to larger properties near the reservoir, and many homes have low-slope roofs that were originally shingled. Those low pitches are prone to ice damming at the eaves during our rare winter ice events, and pine needle accumulation in valleys holds moisture against the roof deck. We see a lot of 1980s to 2000s brick homes with architectural shingles that are due for replacement, and metal roofing is a strong fit because it sheds debris, reflects heat, and handles wind uplift better than worn asphalt.

Our team has worked across the Jackson metro for years, from Belhaven bungalows to Flowood subdivisions. We understand the local building stock and the weather patterns that drive roof failures here, and we bring that experience to every Flowood job.

Our services in Flowood

How a Job Works in Flowood

Step 1: You call us at (601) 213-0169 or request a free estimate online. We schedule an on-site assessment at your Flowood property, inspect the roof and attic if accessible, and talk through your options. We will explain what we find, whether it is a repair or a full replacement, and give you a written estimate before any work begins.

Step 2: Once you approve the estimate, we handle the work. In Flowood, that often means coordinating with HOA design review for panel profile and color, pulling the required roofing permit from the local building department, and planning around tight driveway access in some of the older subdivisions. We protect your landscaping, stage materials carefully, and keep you informed on timing. Our crew is trained on standing seam, corrugated panels, metal shingles, and stone-coated steel, so we can match the right system to your home and your budget.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you to make sure you are satisfied. We do not consider a job finished until your property is clean and you understand how to care for your new metal roof.

Pricing for metal roofing in Flowood depends on the size and pitch of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot, though code limits how many layers you can cover. Repairs start at $450, and coating or painting an existing metal roof starts at $2.50 per square foot. For an accurate number, call (601) 213-0169 to schedule a free estimate. We will give you a clear, written price with no surprises.

My Flowood subdivision has a low-pitch roof that holds pine needles. Will a metal roof help with that?
Yes. Metal roofs shed debris much better than asphalt shingles, especially on the low-slope roofs common in Flowood's 1980s and 1990s subdivisions. Pine needles and oak leaves tend to slide off or blow away instead of sitting in valleys and holding moisture. We can also recommend a panel profile that minimizes debris catch and discuss gutter options to keep water moving away from your foundation.
A storm just lifted some panels on my roof near the Reservoir. How fast can you respond?
We treat storm and wind damage as a priority. Call us at (601) 213-0169 and we will schedule an inspection as quickly as possible, often the same day or next day depending on volume. We can tarp or secure the area to prevent further water intrusion, document the damage for your insurance claim, and provide a repair estimate. We never promise insurance coverage, but we do provide the documentation you need to file.
What is the typical cost to replace a shingle roof with metal on a 2,000 square foot Flowood home?
For a 2,000 square foot roof, a basic corrugated or ribbed panel system might start around $11,000 to $14,000, while standing seam could run $20,000 or more depending on complexity. Coating an existing metal roof is much less, starting around $5,000 for that size. The key factors are roof pitch, number of penetrations, access, and material choice. We provide a free estimate so you get a number specific to your home.
Do I need a permit to replace my roof in Flowood?
In most cases, yes. The City of Flowood requires a roofing permit for a full replacement or re-roof, and the rules and fees are set by the local building department. We handle the permit application for you and make sure the work meets current code, including limits on how many layers of shingles can be covered. We always defer to the local building department for final requirements, and we will verify everything before starting.
My HOA has design rules. Can you help with approval for a metal roof?
Yes. Many Flowood subdivisions have HOA design review that restricts panel profile and color. We can provide product samples, color chips, and specification sheets to submit to your HOA, and we will coordinate with them on your behalf. If there is a property line issue with a neighbor, we follow local setback rules and can adjust the installation plan to stay within your boundary.
Are you fully insured for work at my Flowood property?
Yes. Jackson Metal Roofing carries general liability insurance and workers' compensation coverage. You can have confidence that our crew is covered and that your home is protected.
What maintenance does a metal roof need in Flowood's climate?
Metal roofs are low maintenance, but in Flowood you should keep gutters and valleys clear of pine needles and oak debris, especially before hurricane season and winter. Check fasteners annually for tightness, particularly on older roofs or after a major storm. We offer inspection services and can replace screws or re-fastening if needed. A periodic coating can also extend the life of an older metal roof and improve its appearance.
Why choose us?

Trusted professionals in Jackson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Jackson

All your work handled by qualified professionals in Jackson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

352+ Verified Client Reviews in Jackson

⭐⭐⭐⭐⭐ 4.9/5 · 352 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Jackson · Response within 24h · No commitment · ☎ (601) 213-0169

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Jackson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm