Serving the Jackson area  ·  (601) 213-0169  ·  Open Mon-Sun 7am-7pm
📞 (601) 213-0169 Free Quote

Metal Roofing in Clinton, MS (39056) · Local Professionals

Jackson Metal Roofing · Fast response in Clinton and the Jackson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+352Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Clinton is a city of brick homes and tall pines, where the housing stock runs from mid-century ranches near Mississippi College to newer two-story subdivisions off Highway 80. The lots are mostly generous, but the trees are close and the Yazoo clay under the soil moves with every wet and dry season.

When Clinton homeowners in 39056 need a metal roof that handles heat, storms, and pine debris, they call Jackson Metal Roofing. We know the older shingle roofs around College Street and the newer architectural shingles in Clinton Park, and we replace and repair both with metal systems built for this climate.

Metal Roofing in Clinton (39056)

Clinton sits on rolling ground west of the Pearl River, with pockets of heavy Yazoo clay that swell after summer storms and shrink in dry spells. That movement stresses roof decks and flashing, especially on the older brick ranches and split-levels near Mississippi College and the historic homes along Jefferson Street. Many of these roofs are original or second-generation shingles, and the low slopes common on mid-century ranches make proper underlayment and panel overlap critical. Newer subdivisions like those off Pinehaven Drive and Clinton-Raymond Road bring steeper gables and tighter lot lines, where we plan panel lengths and staging carefully to avoid damaging landscaping and fences.

Our team has worked across Clinton and the Jackson area for years, from the tree-shaded streets near the Clinton Public Library to the busy commercial corridor along Highway 80. We know how loblolly pines and water oaks drop debris that traps moisture in valleys, and we install metal roofs that shed it cleanly.

Our services in Clinton

How a Job Works in Clinton

Step 1: You call (601) 213-0169 or request a free estimate online. We schedule an on-site assessment, inspect your existing roof and attic, check for soft decking and flashing issues, and talk through metal options that fit your home and budget. You get a written estimate before any work begins.

Step 2: Once you approve, we pull the required roofing permit through the City of Clinton building department and coordinate any HOA design review if your subdivision requires it. Our crew protects your landscaping, removes the old roofing, repairs any decking, and installs your new metal roof with manufacturer-specified fasteners and flashing. Most residential roofs take a few days depending on size and weather.

Step 3: We clean up thoroughly, haul away all debris, and walk the property with you to review the finished work. We do not leave until you are satisfied and your yard is as clean as we found it.

Metal roofing in Clinton is priced by the square foot, and most homeowners here pay between $8 and $10 per square foot for installation, depending on panel type and roof complexity. A basic corrugated or ribbed panel roof starts around $5.50 per square foot, while standing seam runs from $10 and copper or specialty metal from $20. Replacement typically starts at $9 per square foot, and retrofitting over existing shingles can start at $7, though code limits how many layers you can cover. Repairs and leak fixes start at $450, and screw replacement or re-fastening starts at $750. The biggest cost factors are roof size, pitch, access, the condition of the decking, and how quickly you need the work done. Call (601) 213-0169 for a free, no-pressure estimate on your Clinton home.

My Clinton home near Mississippi College has an older shingle roof with some sagging. Can metal go over it or do I need a full tear-off?
Sagging usually means the decking or framing has issues, and metal roofing needs a solid, flat substrate. We inspect the attic and decking first. If the structure is sound and you have only one layer of shingles, a retrofit may be possible, but many older Clinton homes need a full tear-off to address rot and bring the roof up to current code. We will give you a straight answer after the free inspection.
A storm just blew some panels loose on my roof in Clinton. How fast can you get out?
We prioritize storm and wind damage calls in Clinton and the surrounding area. Call (601) 213-0169 and we will schedule an inspection as soon as possible, often within a day or two depending on call volume. We can tarp active leaks and make temporary repairs to prevent further damage before scheduling permanent fixes.
What does a typical metal roof replacement cost for a 2,000 square foot home in Clinton?
For a 2,000 square foot ranch or two-story in Clinton, a standard standing seam or metal shingle replacement often falls in the $18,000 to $24,000 range, depending on pitch, decking condition, and whether we tear off existing shingles. Simpler corrugated panel roofs can cost less. We provide a detailed written estimate after inspecting your roof so you know exactly what you are paying for.
Do I need a permit from the City of Clinton to replace my roof?
Yes, the City of Clinton generally requires a roofing permit for a full replacement or re-roof, and inspection requirements apply. We handle the permit application and coordinate inspections as part of your project. Because rules can change, we always confirm current requirements with the city building department before work starts.
My HOA in a Clinton subdivision has design rules. Can you help with approval for a metal roof?
We can provide panel profiles, color samples, and manufacturer specifications to submit to your HOA for design review. Some Clinton subdivisions restrict metal roofing style or color, so it is best to check your covenants early. We will coordinate with your HOA point of contact and adjust the plan to meet approved guidelines.
Are you fully insured for roofing work on my Clinton property?
Yes, Jackson Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Clinton's climate?
In Clinton, the main maintenance tasks are keeping pine needles and oak leaves out of valleys and gutters, checking fasteners after severe storms, and washing off pollen and dirt once a year. We recommend an annual inspection, especially after tornado season in spring, to catch loose fasteners or flashing issues early before they become leaks.
Why choose us?

Trusted professionals in Jackson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Jackson

All your work handled by qualified professionals in Jackson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

352+ Verified Client Reviews in Jackson

⭐⭐⭐⭐⭐ 4.9/5 · 352 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Jackson · Response within 24h · No commitment · ☎ (601) 213-0169

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Jackson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm