Serving the Jackson area  ·  (601) 213-0169  ·  Open Mon-Sun 7am-7pm
📞 (601) 213-0169 Free Quote

Metal Roofing in Canton, MS (39046) · Local Professionals

Jackson Metal Roofing · Fast response in Canton and the Jackson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+352Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Canton's historic square and the surrounding blocks are full of older cottages, farm buildings, and homes that have seen a century of Mississippi weather. The mix of architectural styles and roof ages means no two jobs are the same, and we like it that way.

Homeowners in Canton (39046) call Jackson Metal Roofing because we understand the local building stock, from the older homes near the square to the newer subdivisions off Highway 51. We're based in Jackson, just a short drive down I-55, and we know the specific challenges that Canton roofs face.

Metal Roofing in Canton (39046)

Canton sits in the Pearl River valley on Yazoo clay, which swells and shrinks with the seasons and puts constant stress on roof structures. The historic square blocks have older cottages and commercial buildings with roofs of many eras, many of which need careful retrofitting to handle modern metal systems. Farm buildings and agricultural structures on the outskirts often have low-slope roofs that are perfect for corrugated panels. The tall pines and oaks that shade many Canton properties drop needles and leaves that trap moisture in valleys and accelerate corrosion, so proper flashing and ventilation are critical. We also see a fair amount of copper and specialty metal roofing on the older homes near the square, which requires a different skill set than standard standing seam.

Our team has worked on roofs across Canton and the surrounding areas, from the historic district to the newer developments along Highway 22. We know the local inspectors, the permit office, and the quirks of the local building stock.

Our services in Canton

How a Job Works in Canton

Step 1: We start with a free on-site assessment. We'll look at your roof, take measurements, check for damage, and talk through your options. You'll get a written estimate before any work begins.

Step 2: Once you approve, we schedule the work. In Canton, that might mean coordinating with the historic district if you're near the square, or working around tight lot access in some of the older neighborhoods. We pull the required permits and handle the inspections.

Step 3: When the job is done, we clean up thoroughly and walk the property with you. We don't leave until you're satisfied and your yard is free of nails and debris.

Pricing for metal roofing in Canton depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. For a free estimate tailored to your Canton property, call us at (601) 213-0169.

My house is near the Canton Historic Square and has an older roof. Can you match the style with a metal roof?
Yes. We work with copper and specialty metals that can mimic the look of older roofing materials, and we can recommend profiles that suit historic homes. We'll also help you understand any historic district design review requirements before we start.
A storm just blew through Canton and I have a leak. How fast can you respond?
We offer free inspections and prioritize emergency repairs. Call us at (601) 213-0169 and we'll schedule a visit as soon as possible, usually within a day or two depending on demand.
What's the typical cost for a metal roof on a 2,000 square foot house in Canton?
For a basic corrugated panel roof, you might start around $11,000 (2,000 sq ft x $5.50). Standing seam would be closer to $20,000. These are rough estimates; the actual price depends on roof pitch, complexity, and material. We provide a free, detailed estimate.
Do I need a permit for a metal roof replacement in Canton?
Yes, roofing permits are commonly required for a full replacement or re-roof. The City of Canton Building Department handles permits, and requirements vary. We'll pull the necessary permits and schedule inspections as part of the job.
My neighbor's tree branches hang over my roof. Can I trim them without permission?
In Mississippi, you generally have the right to trim branches that overhang your property line, but you should check local ordinances and talk to your neighbor first. If your HOA has rules, follow those. We can advise on roof damage from overhanging limbs and help document it for insurance.
Are you fully insured for work at my Canton home?
Yes, we carry general liability and workers' compensation insurance.
How often should I have my metal roof inspected in Canton?
We recommend an inspection every two to three years, and after any major storm. Canton's pine needles and oak debris can clog valleys and gutters, leading to moisture issues. A quick inspection can catch problems early and extend the life of your roof.
Why choose us?

Trusted professionals in Jackson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Jackson

All your work handled by qualified professionals in Jackson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

352+ Verified Client Reviews in Jackson

⭐⭐⭐⭐⭐ 4.9/5 · 352 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Jackson · Response within 24h · No commitment · ☎ (601) 213-0169

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Jackson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm