Serving the Jackson area  ·  (601) 213-0169  ·  Open Mon-Sun 7am-7pm
📞 (601) 213-0169 Free Quote

Metal Roofing in Edwards, MS (39066) · Local Professionals

Jackson Metal Roofing · Fast response in Edwards and the Jackson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+352Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Edwards is a small town where the Big Black River bottoms meet the rolling hills of Hinds County, and most of the roofs here have been through decades of Mississippi sun and storms. The housing stock tells the story: older shingle roofs on modest ranch homes and farmhouses, plus a fair number of metal roofs on barns, sheds, and workshops that have seen better days.

When homeowners in Edwards (39066) call us, it's usually because they're tired of patching the same leak or they've decided it's time to upgrade to a metal roof that can handle the heat, the wind, and the pine needles. We're based in Jackson, just up the road, and we know the specific challenges of roofing out here.

Metal Roofing in Edwards (39066)

Edwards sits on the western edge of Hinds County, and the terrain here is a mix of flat bottomland near the Big Black River and gently rolling ground as you move east toward Jackson. That means drainage matters. We see a lot of older homes with low-pitched roofs that have been re-shingled a time or two, and when the Yazoo clay soil shifts, it can throw gutters out of alignment and create ponding issues at the eaves. Farm buildings and outbuildings often have corrugated panels that are rusted through or have loose fasteners after years of thermal movement. We also run into tight access on some of the older lots in town, where a dumpster or a lift has to be placed carefully to avoid the power lines and mature trees.

Our team has worked on everything from small repair jobs on a barn off Highway 80 to full standing seam installations on homes near the Edwards School District. We understand the local building stock and the weather patterns that wear roofs down here.

Our services in Edwards

How a Job Works in Edwards

Step 1: You call us at (601) 213-0169 or fill out our contact form, and we schedule a free on-site assessment. We'll look at your existing roof, check for soft spots, flashing issues, and signs of leaks, and talk through your options, whether that's a repair, a metal roof over shingles, or a full replacement.

Step 2: Once you approve the estimate, we handle the permitting with the local building department (requirements vary by jurisdiction, so we verify everything before we start). For jobs in Edwards, we coordinate delivery and staging to work around tight driveways and older trees. If you're in an HOA or a historic district, we'll help you understand any design review requirements before ordering materials.

Step 3: After the work is done, we do a thorough cleanup, magnet sweep for nails, and a final walkthrough with you to make sure you're satisfied. We don't leave until the site is clean and you know how to care for your new roof.

Pricing for metal roofing in Edwards depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical ranch home, metal roof installation starts around $8 per square foot, standing seam runs about $10 per square foot, and a metal roof over shingles (retrofit) can start at $7 per square foot. Repairs like fixing a leak or replacing flashing typically start around $450, and screw replacement or re-fastening on an older metal roof starts at $750. We always provide a free estimate so you know exactly what to expect before we begin. Call (601) 213-0169 to schedule yours.

My barn near the Big Black River has corrugated metal panels that are rusting through. Can you replace just the panels or do I need a whole new roof?
We can often replace individual panels if the framing and purlins are still sound, but if the rust is widespread or the fasteners are failing across the roof, a full replacement may be more cost-effective in the long run. We'll inspect the structure and give you an honest assessment.
A storm just blew through Edwards and lifted some panels on my roof. How quickly can you get out to make repairs?
We prioritize storm damage calls and can usually get an inspector out within a day or two, depending on the volume of calls. For active leaks, we can often do temporary tarping to prevent further damage. Call us at (601) 213-0169 to get on the schedule.
What's the typical cost to replace a shingle roof with metal on a 1,500 square foot house in Edwards?
For a 1,500 square foot ranch with a simple gable roof, you're looking at roughly $12,000 to $18,000 for a standard metal roof installation, depending on the panel type and whether we need to repair any decking. Standing seam will be on the higher end. We provide a detailed free estimate after inspecting your roof.
Do I need a permit to put a metal roof on my house in Edwards?
Yes, roofing permits are commonly required for a full replacement or re-roof in Edwards and Hinds County. The exact requirements and fees vary, so we always verify with the local building department before starting work. We handle the permit application as part of our service.
My neighbor's tree branches hang over my roof and I'm worried about damage. What are my options if a limb falls?
If a limb from your neighbor's tree falls on your roof, your homeowner's insurance typically covers the damage to your property, but it's a good idea to document the tree's condition and any prior concerns. We can inspect your roof for damage and provide a written report for your insurance claim. For preventative measures, we can install snow guards or trim back branches if they're on your side of the property line.
Are you fully insured for roofing work in Edwards?
Yes, we carry general liability insurance and workers' compensation coverage for all our employees. We're happy to provide a certificate of insurance upon request so you can verify our coverage before we start.
What maintenance does a metal roof need in Edwards to handle the summer heat and pine needles?
Pine needles and oak debris can collect in valleys and behind chimneys, holding moisture and causing rust or leaks. We recommend having your roof inspected annually and cleaned as needed, especially after storm season. We also check fasteners and sealant around flashing, which can degrade over time. A simple maintenance plan can add years to your roof's life.
Why choose us?

Trusted professionals in Jackson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Jackson

All your work handled by qualified professionals in Jackson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

352+ Verified Client Reviews in Jackson

⭐⭐⭐⭐⭐ 4.9/5 · 352 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Jackson · Response within 24h · No commitment · ☎ (601) 213-0169

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Jackson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm