Serving the Jackson area  ·  (601) 213-0169  ·  Open Mon-Sun 7am-7pm
📞 (601) 213-0169 Free Quote

Metal Roofing in Brandon, MS (39193) · Local Professionals

Jackson Metal Roofing · Fast response in Brandon and the Jackson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+352Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Brandon is a city of larger lots and brick homes, where tall hip roofs take a beating from hail and squall-line winds. From the established neighborhoods off Highway 80 to the newer subdivisions spreading toward the Reservoir, homeowners here know that a roof is more than just shingles. It is the first line of defense against Mississippi weather.

That is why so many Brandon residents (39193) call Jackson Metal Roofing. We understand the local building stock, from the brick ranches with low-pitched roofs to the two-story homes with architectural shingles. We also know the specific challenges of the area, like the tall pines that drop debris and the Yazoo clay soil that shifts under foundations.

Metal Roofing in Brandon (39193)

Brandon sits on rolling terrain with a mix of mature neighborhoods and new developments. The soil here is heavy Yazoo clay, which swells and shrinks with the seasons, putting stress on roof structures and flashings. Many homes have steep hip roofs that look great but are tricky to access and repair. Add in the frequent afternoon thunderstorms with straight-line winds and occasional hail, and you have a recipe for roof damage. We often see wind-lifted panels, failed fasteners, and leaks around chimneys and skylights. The tall loblolly pines and water oaks are beautiful but drop needles and limbs that can clog valleys and gutters, holding moisture against the roof deck.

Our team has worked on everything from older brick ranches near downtown Brandon to new construction in the subdivisions off Highway 18. We know how to handle the local permitting process and can recommend roofing materials that stand up to our climate, whether that is standing seam metal for its durability or stone-coated steel for its classic look.

Our services in Brandon

How a Job Works in Brandon

Step 1: It starts with a phone call to (601) 213-0169 or a request through our website. We schedule a free on-site assessment at your convenience. Our team will inspect your roof, take measurements, and discuss your options. We will also check for any signs of damage that might not be obvious from the ground.

Step 2: Once you approve the estimate, we order materials and schedule the work. In Brandon, we often need to coordinate with HOA guidelines or historic district requirements if your home is in a designated area. We handle the permitting paperwork and make sure everything is in order before we start. On the day of installation, our crew arrives early and works efficiently, protecting your landscaping and keeping the site tidy.

Step 3: After the job is done, we do a thorough cleanup, including magnet sweeps for nails. We walk you through the finished roof and make sure you are satisfied. We do not leave until your property is clean and you have all the information you need for maintenance.

Pricing for metal roofing in Brandon depends on several factors: the size and pitch of your roof, the material you choose, and the condition of the existing roof. For a typical 2,000 square foot home, metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot. If you are replacing an old shingle roof, the cost starts at $9 per square foot. For a simple repair, such as fixing a leak or replacing fasteners, expect to pay from $450. We also offer free estimates, so you can get an accurate quote for your specific project. Call us at (601) 213-0169 to schedule yours.

My Brandon home has a steep hip roof with original architectural shingles from the 1990s. Is it a good candidate for stone-coated steel?
Yes, stone-coated steel is an excellent choice for those older hip roofs. It mimics the look of shingles or shakes but is much more durable and energy-efficient. It handles the heat and humidity well and can often be installed over the existing shingles if the deck is in good shape, saving you on disposal costs. We can assess your roof to see if it qualifies for a retrofit.
After a storm in Brandon, I noticed some lifted panels on my metal roof. How quickly can you respond for emergency repairs?
We prioritize storm damage calls in Brandon and the surrounding areas. Call us at (601) 213-0169 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the area to prevent further damage and provide a detailed repair estimate.
What is the typical cost to replace a metal roof on a 2,500 square foot home in Brandon?
For a 2,500 square foot home, a full metal roof replacement typically ranges from $22,500 to $30,000, depending on the material and complexity. Standing seam is on the higher end, while corrugated panels are more budget-friendly. We provide free estimates so you can get a precise number for your home.
Do I need a permit from the City of Brandon to install a metal roof?
Yes, roofing permits are generally required for replacements and new installations in Brandon. The exact requirements and fees vary, so we recommend checking with the City of Brandon Building Department. We can help you navigate the permitting process and ensure your project complies with local codes.
My HOA in Brandon has strict rules about roofing materials. Can you help with approval?
Absolutely. We are familiar with many HOA guidelines in Brandon and can provide material samples and documentation to help you get approval. We can also adjust our installation methods to meet specific HOA requirements, such as color restrictions or panel profiles.
Are you fully insured for roofing work in Brandon?
Yes, Jackson Metal Roofing is fully insured, carrying both general liability and workers' compensation insurance.
How often should I have my metal roof inspected in Brandon to prevent problems from pine needles and storms?
We recommend an annual inspection, ideally in the spring before storm season, and after any major weather event. Pine needles and debris can accumulate in valleys and gutters, leading to moisture issues. A quick inspection can catch loose fasteners or damaged flashing early, saving you from costly repairs.
Why choose us?

Trusted professionals in Jackson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Jackson

All your work handled by qualified professionals in Jackson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

352+ Verified Client Reviews in Jackson

⭐⭐⭐⭐⭐ 4.9/5 · 352 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Jackson · Response within 24h · No commitment · ☎ (601) 213-0169

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Jackson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm