Serving the Jackson area  ·  (601) 213-0169  ·  Open Mon-Sun 7am-7pm
📞 (601) 213-0169 Free Quote

Metal Roofing in Ridgeland, MS (39157) · Local Professionals

Jackson Metal Roofing · Fast response in Ridgeland and the Jackson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+352Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Ridgeland's brick homes near the Ross Barnett Reservoir were built to handle Mississippi weather, but the shingle roofs on those 1970s to 1990s houses take a beating from pine debris and straight-line winds. If you live off Highland Colony Parkway or near Old Agency Road, you've probably seen shingles curling or granules piling up in the gutters after a storm.

That's where Jackson Metal Roofing comes in. We're based in Jackson and know the Capital Region's housing stock inside and out, from the low-pitched ranches in Woodland Hills to the newer two-story subdivisions off Rice Road. Homeowners in Ridgeland (39157) call us because we show up, give straight answers, and install metal roofs that shed pine needles and stand up to the next squall line.

Metal Roofing in Ridgeland (39157)

Ridgeland sits on rolling Yazoo clay, and that shrink-swell soil moves under your foundation and roof structure. It's why we pay close attention to flashing details and fastening patterns, especially on older homes where the decking may have shifted. The tall loblolly pines and water oaks that make Ridgeland beautiful also drop debris that traps moisture in roof valleys, so we recommend metal roof over shingles (retrofit) or a full tear-off with proper underlayment to prevent corrosion and leaks. Many homes here have low-slope roofs over porches or additions, and we match panel profiles to those pitches so water sheds correctly. Tight lots near the Reservoir sometimes mean limited access for equipment, so we plan staging carefully to protect landscaping and driveways.

Our team has worked throughout Ridgeland and the Jackson area for years, from small repairs on brick ranches to full standing seam installations on new construction. We know the local building department's inspection quirks and the HOA design review processes in neighborhoods like Bridgewater and Wendover, so we can help you navigate approvals without delays.

Our services in Ridgeland

How a Job Works in Ridgeland

Step 1: Call us at (601) 213-0169 or request a free estimate online. We'll schedule an on-site assessment at your Ridgeland property, inspect your existing roof (including attic ventilation and decking condition), and discuss options like metal roof over shingles or a full replacement. You'll get a written proposal with clear pricing and no pressure.

Step 2: Once you approve, we pull the required permits from the City of Ridgeland and coordinate any HOA approvals. On installation day, our crew arrives on time, protects your landscaping with tarps, and works efficiently. For tighter lots near the Reservoir, we use compact equipment and careful staging to avoid damage. We also handle unexpected issues like rotted fascia or chimney flashing repairs as they come up, keeping you informed.

Step 3: After the work is done, we do a thorough cleanup, magnet-sweep for nails, and walk the property with you to make sure you're satisfied. We don't leave until your yard and driveway are as clean as we found them.

Pricing for metal roofing in Ridgeland depends on the job. A metal roof over shingles (retrofit) starts around $7 per square foot, while standing seam runs from $10 per square foot. Full replacement with architectural shingles removal starts at $9 per square foot. For smaller jobs, metal roof repair starts at $450, and screw replacement or re-fastening starts at $750. Gutters for metal roofs start at $9 per linear foot. Factors like roof size, pitch, access, and the condition of your decking affect the final cost. We give free, no-obligation estimates, so call (601) 213-0169 to get a realistic number for your home.

My Ridgeland home near the Reservoir has pine needles constantly clogging the valleys. Will a metal roof help with that?
Yes. Metal roofs shed debris much better than shingles, especially when we install them with a smooth panel profile and proper flashing. We can also recommend gutter guards sized for pine needles. For homes in Ridgeland (39157), we often suggest a standing seam or corrugated panel with a 1-inch raised seam to keep needles from catching.
A storm just blew through Ridgeland and lifted some shingles on my roof. How fast can you respond?
We prioritize storm damage calls in Ridgeland and the Jackson area. Call us at (601) 213-0169 and we'll schedule an inspection, usually within 24 to 48 hours depending on demand. We can tarp active leaks and provide a written estimate for repairs or replacement, and we document damage for insurance claims if needed.
What's the typical cost to replace a shingle roof with metal on a 2,000-square-foot house in Ridgeland?
For a 2,000-square-foot home, a metal roof over shingles (retrofit) might run $14,000 to $20,000, while a full standing seam replacement could be $20,000 to $30,000. Prices vary with roof complexity, pitch, and material choice. We provide free estimates so you get an accurate figure for your specific property.
Do I need a permit from the City of Ridgeland to install a metal roof?
Yes, most full roof replacements and re-roofs require a permit from the City of Ridgeland Building Department. Requirements vary by project scope, and historic districts or HOA communities may have additional design review. We handle the permit application and inspections for you, ensuring the work meets local code.
My HOA in Ridgeland has design rules. Can you help get approval for a metal roof?
Absolutely. We work with HOAs regularly and can provide material samples, color charts, and specifications to submit for approval. We'll coordinate with your HOA board to address any concerns about panel profile or color, and we won't start work until you have written approval.
Are you fully insured for roofing work in Ridgeland?
Yes, Jackson Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Ridgeland's humid climate?
In Ridgeland's heat and humidity, we recommend an annual inspection to check for loose fasteners, debris buildup, and sealant wear. Keep pine needles and leaves off the roof, especially in valleys and behind chimneys. Every few years, have us check flashing and gaskets. Preventive maintenance extends the life of your metal roof and prevents leaks.
Why choose us?

Trusted professionals in Jackson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Jackson

All your work handled by qualified professionals in Jackson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

352+ Verified Client Reviews in Jackson

⭐⭐⭐⭐⭐ 4.9/5 · 352 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Jackson · Response within 24h · No commitment · ☎ (601) 213-0169

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Jackson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm