Serving the Jackson area  ·  (601) 213-0169  ·  Open Mon-Sun 7am-7pm
📞 (601) 213-0169 Free Quote

Metal Roofing in Byram, MS (39272) · Local Professionals

Jackson Metal Roofing · Fast response in Byram and the Jackson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+352Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Byram is the kind of place where brick ranches sit on shady lots off Siwell Road and Gary Road, with tall pines dropping needles on roofs that were shingled back in the 1990s. If you live south of Jackson in 39272, you know the look: low-pitched roofs, mature trees, and gutters that fill up every spring.

Homeowners here call Jackson Metal Roofing because we understand what Byram roofs go through. Between the pine debris, the summer storms that roll up from the Pearl River valley, and the Yazoo clay that shifts under everything, shingles take a beating. We are based in Jackson and serve Byram and the surrounding areas, and we have seen just about every roof problem this ZIP code can produce.

Metal Roofing in Byram (39272)

Byram sits on rolling ground south of Jackson, and a lot of the neighborhoods here were built out in the 1970s through the 1990s with brick ranches and split-levels on generous lots. Those lots are full of loblolly pines, water oaks, and the occasional magnolia, which means two things for your roof: shade that keeps things cool but also holds moisture, and debris that collects in valleys and behind chimneys. The soil underneath is Yazoo clay, which swells and shrinks with the seasons, so we pay close attention to how your roof ties into the structure and how water drains away from the foundation. Low-slope roofs are common here, and that is exactly where shingles fail first, especially around flashings and in the valleys where pine needles pile up.

Our team has worked on everything from older brick ranches near Byram Swinging Bridge to newer homes off Davis Road. We know how to handle the tight driveways, the mature trees that overhang the roof, and the access issues that come with a lot that slopes toward the back. Whether you need a full standing seam installation or a repair on a leaking vent boot, we bring the right materials and the local know-how.

Our services in Byram

How a Job Works in Byram

Step 1: You call us at (601) 213-0169 or request a free estimate online. We schedule a time to come out and walk your property, look at the roof from the ground and on top, and check the attic if needed. We will tell you what we see, what it will cost, and whether a repair makes sense or if it is time to think about replacement. No pressure, no sales pitch.

Step 2: Once you approve the scope, we pull the permits required by the City of Byram and get to work. If your home is in an HOA, we help you with the paperwork and color choices so there are no surprises. On tight lots with trees close to the house, we use careful staging and protect your landscaping. We keep the job site organized and clean up debris daily.

Step 3: When the work is done, we walk the roof with you, show you the finished product, and make sure you are satisfied. We magnet-sweep the yard for nails and haul away all old materials. You get a clean property and a roof that is ready for the next Byram thunderstorm.

Pricing for metal roofing in Byram depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. For a typical brick ranch here, metal roof installation starts around $8 per square foot, standing seam runs about $10 per square foot, and a retrofit over existing shingles starts at $7 per square foot. If you just need a leak repair or flashing work, those jobs often start around $450. We always provide a free estimate with a clear breakdown, so you know exactly what you are paying for. Call (601) 213-0169 to schedule yours.

My brick ranch off Siwell Road has pine needles piling up in the roof valleys. Can metal roofing help with that?
Yes. Metal roofs shed debris much better than shingles, especially if we install a smooth panel profile. We can also recommend gutter guards and show you how to keep those valleys clear. Pine needles hold moisture against shingles and speed up rot, so switching to metal is a smart move for heavily wooded lots in Byram.
A storm just lifted some shingles on my roof near Byram Middle School. How fast can you respond?
We offer free storm damage inspections and prioritize emergency repairs in Byram and the Jackson area. Call us at (601) 213-0169 and we will get someone out as soon as possible to tarp or repair the damage and document it for your insurance claim.
What does a metal roof cost for a typical three-bedroom ranch in 39272?
Most Byram ranches fall in the 1,500 to 2,200 square foot roof area range. At our starting prices, a corrugated panel roof might run $5.50 to $8 per square foot installed, while standing seam is closer to $10. The final number depends on pitch, access, and whether we are removing old shingles. We give you a free written estimate.
Do I need a permit from the City of Byram to replace my roof?
Yes, a roofing permit is typically required for a full replacement or re-roof in Byram. Requirements and fees can vary, so we always confirm with the local building department before starting. We handle the permit application for you as part of the job.
My HOA requires approval for roof color. Can you help with that?
Absolutely. We work with several HOAs in the Byram area and can provide color samples, product specs, and the paperwork your board needs. We will not order materials until you have written approval, so there are no surprises.
Are you insured for work on my property?
Yes, Jackson Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Byram's climate?
Not much, but a yearly inspection helps. We check fasteners, look for debris buildup in valleys, and make sure flashings are tight. After a big storm, it is worth a quick look. We offer free inspections and can set up a maintenance plan if you want.
Why choose us?

Trusted professionals in Jackson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Jackson

All your work handled by qualified professionals in Jackson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

352+ Verified Client Reviews in Jackson

⭐⭐⭐⭐⭐ 4.9/5 · 352 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Jackson · Response within 24h · No commitment · ☎ (601) 213-0169

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Jackson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm